Cope & Stick Doors
Special Charges and Information:
Glass door frames:
Drawer Fronts:
Prices are subject to change
- All doors and drawer fronts are priced by the square foot - minimum 1 sq. ft.
- Finger pull routing - $4.00 per door standard routing runs style to style.
- Accent pegs raised $10.00 per door (4 pegs) 3/8 X 3/8. $5.00 for flush.
- Standard distressing $5.00 per door. Specify light, medium, or heavy distressing.
- Old World distressing $10.00 per door.
- Doors over 22” wide or 44” tall or slab drawer fronts over 22” wide & 8” high are not guaranteed.
- Orders of multiple small doors or drawer fronts are subject to a price increase.
- Doors with appliance panel cut add $20.00 per door.
- All paint grade doors and drawer fronts will have a MDF panel unless noted by you.
- Paint grade doors and drawer fronts with wood panels are not guaranteed.
- Wainscot panels and multiple panels are priced per drawing - please fax for a quote.
- Solid drawer fronts over 36” wide or over 12” high add $10.00 and are not guaranteed.
- Lazy Susan doors are generally ran on 3 sides. We will not run the detail on one long edge. Any requests for 3” style on one side add $5.00. Specify Lazy Susan in the comments area;
- 7/8” thick doors will have an additional 20% added.
- 1” thick doors (frame only) will have an additional 30% added.
- PS-9 panel maybe used in place of any recessed panel (1/4”) when ¼” is not available i.e., rustic cherry/rustic hickory/knotty alder. (some knots will be puttied and imperfections may come through).
- We do not bore for hinges unless you (the customer) request boring on your order. Cost is $1.50 per hole. We offer 3 hole press or single hole press. We bore 3 ½ to center. Anything over 45” tall will have 3 holes unless noted by you (the customer).
Glass door frames:
- Use ¼” matching recessed panel door style for pricing. Wood stops are $6.00 —per 4-piece set (upon request only.)
- Cope & Stick Glass French Lites standard mullion width 1”, standard placement $7.00 per lite. Special placement $10.00 per lite. Minimum lite opening 3 X 3.
- Applied moldings are standard placement $15.00 per lite. Special placement $20.00 per lite. (Glass openings will be smaller with applied molding).
Drawer Fronts:
- 5-piece raised panel drawer fronts with applied molding are the same price as matching door + $10.00 per drawer front. Minimum height - 8 1/2".
- 5-piece fronts are manufactured to match the accompanying door. They are the same price as matching door + $8.00. Minimum height is 6" - anything less PS-9 or PS-7 is recommended. All grains run horizontal. (6 1/2” drawer fronts are suggested for using 1 3/4” rails on raised panel drawer fronts).
- Vertical grain available upon request – add $5.00 per drawer front.
Prices are subject to change